Plenum Cables

Plenum Cables for Video and Audio Installations

Choose a made-to-order Belden 1695A SDI cable or a plenum XLR microphone cable for commercial AV, broadcast and installed sound. Select the assembly and length you need below.

Shop Plenum Cable Assemblies

Belden 1695A Plenum 6G-SDI BNC

RG6, 75-ohm coaxial cable with a CMP-rated Belden 1695A jacket and true 75-ohm BNC connectors. Built for SDI video runs in plenum spaces.

  • SD, HD, 3G and 6G-SDI applications
  • Choose black or violet and lengths from 1.5 to 200 ft
  • Assembled and individually tested in the USA
Shop plenum SDI BNC cables

Plenum XLR Microphone Cables

White, plenum-rated microphone cable with two 22 AWG conductors, a foil shield and Neutrik XLR connectors with gold-plated contacts.

  • For balanced microphone and line-level audio
  • Choose lengths from 12 to 200 ft
  • Made to order for installed sound projects
Shop plenum XLR cables

Compare the Cable Options

Feature SDI BNC video cable XLR audio cable
Cable Belden 1695A RG6, 75 ohms Two 22 AWG conductors, foil shield
Connectors 75-ohm BNC male to BNC male Neutrik XLR male to XLR female
Jacket CMP-rated Belden 1695A Plenum-rated; confirm the required marking for your project
Available lengths 1.5 to 200 ft 12 to 200 ft

What Is a Plenum Cable?

Plenum cable is made with a jacket intended for installation in air-handling spaces, such as certain spaces above drop ceilings. Cable requirements depend on the installation and local code. Check the cable's printed rating and your project specifications before ordering. The Belden 1695A SDI cable above is CMP-rated; if your XLR project calls for a specific printed certification, contact us to confirm the available construction.

Frequently Asked Questions

Which plenum cable should I choose for an SDI camera run?

Choose the Belden 1695A RG6 assembly for SD, HD, 3G or 6G-SDI video over 75-ohm BNC connections. Confirm the cable length against your equipment and signal requirements.

Which cable is for microphones or balanced audio?

Choose the plenum XLR cable for a male-to-female XLR audio connection. It has two 22 AWG conductors and a foil shield.

Can I request a different assembly or project quantity?

Yes. Send us the cable type, lengths, connector requirements, quantity and any jacket-rating requirement so we can review your build.

Need a Custom Plenum Cable Quote?

Tell us about your signal type, run lengths, connectors, quantity and installation requirements.

Request a quote