Product Description
50-cable bulk pack · Green identification
12/4 Neutrik speakON® Speaker Cables — 50 Pack
Equip a compatible bi-amped, multi-way or multi-circuit system with 50 matching 12 AWG four-conductor speaker cables. Every assembly uses genuine Neutrik NL4FXX-W-S locking connectors and is hand assembled and tested by AV-Cables.
Bulk-pack configuration
50 fully assembled speaker cables of the selected length
12 AWG, 4-conductor stranded copper with rugged black SJOOW jacket
Genuine Neutrik NL4FXX-W-S 4-pole speakON® at both ends
Choose one length for all 50 cables
Select the required length from the product options above. Each pack contains 50 cables in the same selected length.
All four contacts connected
Every cable connects 1+ to 1+, 1− to 1−, 2+ to 2+ and 2− to 2−. Use this configuration only with equipment designed for both speakON contact pairs.
Green identification
Green connector coding identifies these as four-conductor assemblies, helping crews distinguish them from AV-Cables brown-coded 12/2 speaker cables during setup and strike.
Ideal for larger systems
- Compatible bi-amped and multi-way loudspeaker systems
- Two-circuit speaker systems using both NL4 contact pairs
- Live-sound, touring and rental inventories
- Houses of worship, theaters and professional AV installations
- Standardizing replacement and backup cable inventory
All 50 cables are individually tested
Each assembly is hand built in the USA and individually checked for continuity, correct four-contact mapping and shorts before the pack ships.
Warranty: AV-Cables lifetime connector replacement warranty.
Frequently asked questions
Does this product include 50 finished cables?
Yes. This is a pack of 50 complete speakON-to-speakON speaker cables, not bulk unterminated cable.
Can I mix 3 ft and 5 ft cables in one pack?
The standard product contains 50 cables in one selected length. For a mixed-length order, contact AV-Cables for a custom quote.
Will this automatically bi-amp my loudspeakers?
No. The connected equipment must be designed and configured for the required multi-way or dual-circuit operation. Follow the amplifier and speaker manufacturers' wiring instructions.
What if my system only uses 1+ and 1−?
For a standard compatible single-circuit system, see the 12/2 speaker cable. Always confirm the equipment manufacturer's pin assignment.
Need a custom bulk configuration?
Contact us for mixed lengths, another quantity or help verifying the correct four-contact wiring for your system.
Request a custom quotespeakON® is a registered trademark of Neutrik AG. Always verify the connector and contact assignment specified by the equipment manufacturer.
